Portable Electrical Fencing Energizer i-POWER U80

Portable electrical fencing mechanism i-POWER U80.
This is a mechanism ideal for fences with low resistance e.g. for fences of very long distances and with dense vegetation.

The device uses a function capable of holding all the animals as it will increase its power when the resistance in the line is low. Thus, the i-POWER U80 mechanism will switch to high power mode when anything touches the enclosure (very low resistance levels 300 to 400 Ohms) and then return to standby mode to minimize consumption.

Description

The mechanism is capable of supplying 15000V open circuit voltage and this voltage decreases depending on the load on your fence.

The i-POWER U80 delivers pulses of around 5000V below about 300 Ohms. This means that the maximum power start is activated at around 300 Ohms, where the device immediately switches to maximum power mode. It offers its maximum energy only when the animal touches the fence or when the losses in the line will be significant.

Installation and operation

The i-POWER U80 is designed to run on a 12V rechargeable battery. If the battery voltage drops below 11.2V then the device will no longer supply power and the LED will flash green & red. This feature avoids deep discharge and thus retains the battery.

To charge the battery, it is recommended to use a 12W - 50W photovoltaic panel, to ensure its good operation and duration. Depending on how sunny the area where your fence is located, we can recommend the appropriate panel.

Consumption

In operation with a 12V rechargeable battery it consumes 50mA - 350mA. Recommended battery for the mechanism, 88Ah - 105Ah.

Package Contents

The mechanism comes in a white cardboard box that includes:

I-POWER U80 mechanism
Cables for connection to the battery
Connection cable to the electrical fencing line (rope, wire or tape)
Grounding 38cm
Instructions manual

Three-year warranty against any manufacturing defect. Does not apply to problems resulting from misuse.

Made in France